4.
Set up the touchpanels for network communication:
Connect the PC that you are using for setup, the control processor, and the touchpanel
to the same Ethernet subnetwork.
(see page 13) or Toolbelt to set the DHCP status and,
if necessary, the IP address, subnet mask, gateway, and related settings for the
touchpanel.
5.
Configure the Touchpanels — the
GUI Designer Help File,
the
Global Configurator Help File
,
and the
Toolbelt Help File
provide step-by-step instructions and detailed information.
The
Global Configurator Help File
also includes an introduction to that software and sections
on how to start a project and configuration.
TLP Pro 1220, TLP Pro 1520, and TLP Pro 1720 Series • Installation Overview
5
