manualshive.com logo in svg

Extron electronics SSP 7.1, User Manual, Page: 76 / 112

Share
Download
Extron electronics SSP 7.1 User Manual Download Page 76

Listening Modes Usage

Listening mode

Number 

of signal 

channels

Types of channels

Media used

Mono

1

• 

1 discrete or 1 downmix 
matrixed, full-bandwidth 
channel (C)

• 

Analog signal

• 

CDs or DVDs downmixed to 
1 channel

Stereo

2

• 

2 discrete or 2 downmix 
matrixed, full-bandwidth 
channel (L/R)

• 

Stereo music

• 

All DVDs downmixed to 2 
channels

Mono to all

Up to 7.1

• 

1 discrete or 1 downmix 
matrixed, full-bandwidth 
channel (C)

• 

2 to 6 matrixed, 
full-bandwidth channels 
(L/R, LS/RS, and CB or LB/RB)

• 

Analog signal

• 

CDs or DVDs downmixed to 
1 channel

Stereo to all

Up to 6.1

• 

2 discrete or 2 downmix 
matrixed, full-bandwidth 
channels (L/R)

• 

2 or 4 matrixed, 
full-bandwidth channels  
(LS/RS and/or LB/RB)

• 

Stereo music

• 

All DVDs downmixed to 2 
channels

Dolby Pro Logic

4

• 

2 discrete, full-bandwidth 
channels (L/R)

• 

1 matrixed, full-bandwidth 
channel (C)

• 

1 matrixed, 
limited-bandwidth 
channel (S)

• 

Stereo and Dolby Surround 
encoded VHS movies and 
broadcast TV programs

Dolby Pro Logic II 
Music or Movie

5.1

• 

2 discrete, full-bandwidth 
channels (L/R)

• 

3 matrixed, full-bandwidth 
channels (C, LS/RS)

• 

1 subwoofer channel via 
Dolby Pro Logic II bass 
management

• 

Stereo and Dolby Surround 
encoded VHS movies and 
broadcast TV programs

• 

Stereo music

• 

Video games

Dolby Digital 5.1

5.1

• 

5 discrete, full-bandwidth 
channels (L/R, C, LS/RS)

• 

1 discrete LFE channel (LFE)

• 

All DVDs

• 

Some broadcast HDTV

• 

Some Direct Broadcast 
Satellite (DBS)

DTS or DTS 96/24

5.1

• 

5 discrete, full-bandwidth 
channels (L/R, C, LS/RS)

• 

1 discrete LFE channel (LFE)

• 

Some DVDs that are 
encoded with DTS

• 

Some CDs that are encoded 
with DTS

 

SSP 7.1 • Reference Material

70

Summary of Contents for SSP 7.1

















































































































Reviews:

No comments