ShareLink 200 N • Operation Using a Computer
11
Operation Using a
Computer
Users can present from a Windows or Mac computer using the ShareLink Software. This
section covers the following:
•
Connecting a Computer to the ShareLink 200 N
•
Setting Up the ShareLink Software
•
NOTES:
macOS computer minimum system requirements
:
•
Dual Core, 1.4 GHz processor or better
•
macOS 10.9 - 10.15
•
Graphics card with 64 MB VRAM or better
Windows computer minimum requirements
:
•
Dual Core, 1.8 GHz processor or better
•
Microsoft Windows 7/8/10
•
Graphics card with 64 MB VRAM or better
Connecting a Computer to the ShareLink 200 N
There are two ways to connect a computer to the ShareLink 200 N:
wirelessly, through an
external WAP, or wired through a network device.
Connecting through an External WAP
1.
Ensure that the external WAP and the ShareLink 200 N are wired to the same network.
2.
Ensure that the ShareLink 200 N is powered on and that wireless network capability is
enabled on your computer.
3.
Open the wireless networks on your PC and connect to the external WAP.
Connecting through a Network Hub, Switch, or Router
1.
Ensure that your computer is connected to the network through a hub, switch, or router.
2.
Connect the RJ-45 connector of the ShareLink 200 N to the network device using an
RJ-45 cable.
PRELIMINARY
Summary of Contents for ShareLink 200 N
Page 6: ...PRELIMINARY ...
