RGB-DVI 300 and RGB-HDMI 300 • Installation
2-3
Rack mounting procedure
The unit can be mounted on any of these rack systems:
RSU 129: 9.5" deep, 1U rack shelf kit (part # 60-190-01)
•
RSB 129: 9.5" deep, 1U basic rack shelf (part # 60-604-01)
•
RSU 126: 6" deep, 1U rack shelf kit (part # 60-190-10)
•
RSB 126: 6" deep, 1U basic rack shelf (part # 60-604-10)
•
1
. Remove rubber feet if these have been installed on the
bottom of the unit.
2
. Align the holes in the base of the unit with holes in the
shelf. Secure the unit to the shelf with two 4-40 x 3/16"
screws in diagonally opposite corners (see the figure
below).
3
. Install false faceplate(s) or other unit(s) on the rack shelf.
4
. Attach the shelf to the rack with the four provided
10-32 x 3/4" bolts
6" Deep Rack Shelf
Front false
faceplate
uses 2
screws.
1/2 Rack Width Front False
Faceplate
Use 2 mounting holes on
opposite corners.
(2) 4-40 x 3/16"
Screws
Rack mounting
Summary of Contents for RGB to DVI Scaler RGB-DVI 300
