Quantum Series Videowall Processing Systems • Operation
67
Accessing the Quantum Control Software
The Windows-based Quantum Control Software enables you to configure and control the
Quantum from your computer by creating a videowall project. Use this control program to
display multiple image sources on single or multiple target displays. Two different control
programs are provided: one for the Quantum Elite models and one for the Quantum
Connect.
NOTE:
The Quantum Elite Control Software does not operate with a Quantum
Connect processor or vice versa.
Some features of the Quantum Control Software include:
•
The user interface is organized into a series of tasks so that you can easily navigate
through them and set up the videowall.
•
A virtual canvas provides an on-screen layout for the videowall where windows can be
added, sized, and positioned.
•
Custom videowall configurations can be saved as scenes (presets) for future recall.
•
You can create a custom user interface so that the system operator can easily recall
the scenes.
See the
Quantum Control Software User Guide
for details on using this software.
Computer System Requirements
For the Quantum Control Software to function correctly and reliably, it must be installed on
a computer that meets or exceeds the following criteria:
Minimum
Recommended
Operating System
Windows XP
Windows 7 or Windows 8
Processor Speed
200 MHz
450 MHz or higher
Memory (RAM)
64 MB
128 MB or higher
Hard Disk Free Space
30 MB
More than 30 MB
Graphics
1024x768, 65 K colors
(16-bit)
1920x1080, 16.7 M colors
(32-bit)
Network Card (Ethernet)
10Base-T
100Base-T
Installing the Software
The control software for your model is provided on a CD with your processor (it is not
available for downloading from the website). To use the software to set up the Quantum
displays, install the program on your computer as follows:
1.
Insert the Quantum CD into the disk drive of your PC and wait for your external drive
screen to open.
2.
Open the folder for your Quantum product (
Quantum
Elite
or
Quantum
Connect
).
3.
Open the
Quantum
Model
Name
Software
folder.
4.
Double-click on the file named
Quantum
Elite_SetupV
n.nn
.exe
or
Quantum
Connect_SetupV
n.nn
.exe
. In the file name,
n.nn
is the software version
number.
The Quantum Installation wizard opens.
5.
Follow the instructions on the wizard screens to complete the software installation.
Summary of Contents for Quantum Connect 82
Page 6: ......
