Operation, cont’d
MVX 128 A VGA Matrix Switchers • Operation
3-26
PRELIMINAR
Y
Example 10: Viewing and adjusting an input audio level
In the following example, an audio level is viewed and adjusted. The steps show
the front panel indications that result from your action.
1
.
Press and release the Esc button (fi gure 3-42).
ENTER PRESET VIEW
ESC
CONTROL
Press the Esc button to clear all selections.
The LED blinks once.
= Blink once
1
1
Figure 3-42 — Clear all selections
2
. Press
and
hold
the Audio button for approximately 2 seconds until the Audio
LED blinks (fi gure 3-43).
RGBHV AUDIO
AUDIO
I/O
The LED blinks to indicate
Audio
mode.
Release the button.
Press and
hold
the Audio button.
2 seconds
= Blinking LED
Figure 3-43 — Select
Audio
mode
3
.
Press and release the Input 5 button (fi gure 3-44).
1
2
3
4
5
6
1
2
3
4
5
OUTPUTS
6
7
8
VIEW
ESC
Press and release the Input 5 button.
The LED lights.
In this example, the output buttons and View and Esc buttons display an audio gain level of +8 dB.
= Lit LED,
F
F
= Fast blinking LED
= Unlit LED,
The output LEDs display the selected input's audio level.
The View and Esc LEDs display
the polarity (gain or attenuation).
Figure 3-44 — Select an input and read the audio level
Summary of Contents for MVX 128
