Operation, cont’d
MVX 128 A VGA Matrix Switchers • Operation
3-10
PRELIMINAR
Y
4
.
Press and release the output 3, output 4, and output 8 buttons (fi gure 3-6).
N
The entire set of ties can be canceled at this point by pressing and releasing the
Esc button. The Esc LED fl ashes once.
1
2
3
4
5
OUTPUTS
6
7
8
ENTER PRESE
Press and release the Output 3, Output 4, and Output 8 buttons.
The buttons blink to indicate that the selected RGBHV and
audio input will be tied to these outputs.
The Enter LED blinks to indicate
the need to confirm the change.
= Blinking LED
Figure 3-6 — Select the outputs
5
.
Press and release the Enter button (fi gure 3-7).
ENTER
The Enter LED and all
input LEDs
and
output LEDs
return to the unlit state.
Press the Enter button to confirm
the configuration change.
Figure 3-7 — Press the Enter button
The current confi guration (fi gure 3-8) is now:
•
Input 5 (video and audio) are tied to output 3, output 4, and output 8
Input
5
(video/audio) tied
to outputs
3
,
4
, and
8.
Input
Output
3
4
8
5
Video
Audio
Figure 3-8 — Example 1, fi nal confi guration
Summary of Contents for MVX 128
