MTP U T A D • Reference Information
Reference Information
MTP U T A D • Reference Information
A-2
A-3
Specifications
Video
Gain ................................................. Unity
Number/signal type ..................... 1 set of proprietary analog signals
Connectors ..................................... 1 female RJ-45
Video input and loop through
Number/signal type ..................... 1 analog RGBHV, RGBS, RGsB, RsGsBs,
component video, S-video, or composite
video input
1 component video (YUV bi-level or tri-
level sync)
1 S-video
1 composite video
1 buffered RGBHV, RGBS, RGsB, RsGsBs,
component video, S-video, or composite
video loop through
Connectors ..................................... 1 female 15-pin HD (RGB, RGBS, RGsB,
RsGsBs)
3 RCA (component video)
1 female 4-pin mini DIN (S-video)
1 RCA (composite video)
1 female 15-pin HD (RGB buffered loop
through)
Nominal level ................................ 1 Vp-p for Y of component video and
S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of
component video
0.3 Vp-p for C of S-video
Minimum/maximum levels ........ 0.3 V to 1.45 Vp-p
Impedance ...................................... 75 ohms
Horizontal frequency .................... 15 kHz to 130 kHz
Vertical frequency .......................... 30 Hz to 150 Hz
Return loss ...................................... <-30 dB @ 5 MHz
DC offset (max. allowable)........... 250 mV
Sync
Input type ....................................... RGBHV, RGBS, RGsB, RsGsBs
Standards ........................................ NTSC 3.58, NTSC 4.43, PAL, SECAM
Input level ...................................... 3.5 V to 5.5 Vp-p, unterminated
Input impedance ........................... 573 ohms ±5%
Max. input voltage ........................ 5.5 V p-p
Polarity............................................ Positive or negative (follows input
polarity)
Audio
Number/signal type ..................... 1 set of proprietary analog signals
Connectors ..................................... 1 female RJ-45
Gain ................................................. Unbalanced output: 0 dB;
balanced output: +6 dB
Frequency response ...................... 20 Hz to 20 kHz, ±1 dB
THD + Noise .................................. 0.15% @ 1 kHz, 0.3% @ 20 kHz at nominal
level
S/N .................................................. >70 dB at maximum output (unweighted)
Stereo channel separation ............ >60 dB @ 1 kHz
CMRR .............................................. >43 dB @ 20 Hz to 20 kHz
Audio input
Number/signal type ..................... 2 stereo, unbalanced
Connectors ..................................... (1) 3.5 mm mini stereo jack
1 pair female RCA
Impedance ...................................... >10k ohms, unbalanced
Nominal level ................................ +4 dBu (1.23 Vrms), -10 dBV (316 mVrms)
Maximum level .............................. +18 dBu, (unbalanced) at 1%THD+N
N
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV
≈
2 dBu
