About the MTP Transmitters
The
Extron MTP T 15HD A Architectural
Twisted Pair
Transmitters,
available in either black, white, or RAL9010 are
a series of wall, furniture or Architectural Adapter Plate (AAP)
mounting versions of the MTP T 15HD A.
The Extron MTP T 15HD A architectural transmitters accept high
resolution computer-video on a female 15-pin HD connector
and a stereo audio signal on a female 3.5 mm mini stereo jack.
The female RJ-45 output connector, mounted on a 3" pigtail,
transmits a computer video and summed mono audio signal to
an MTP R 15HD A, MTP RL 15HD A, or MTP RL 15HD A SEQ
receiver. A pre-peaking control switch boosts the transmission
distance of the proprietary signal.
The MTP T 15HD A architectural series is part of a system for
long-distance distribution of VGA or other high resolution
video and audio, over Extron’s Enhanced Skew-Free™ A/V
UTP Cable, or any CAT 5, 5e, or 6 shielded twisted pair (STP),
unshielded twisted pair (UTP), or foil shielded twisted pair
(FTP) cable.
TP cable advantages
Twisted pair cable is smaller, lighter, more flexible, and less
expensive than coaxial cable. Termination of the cable with
RJ-45 connectors is simple, quick, and economical. See
TP Cable
Termination
later in this manual for wiring details.
Transmission distance
The maximum distance is determined by the frequency and
resolution of the signal that is input to the transmitter.
Refer to the table on page 1-3 for the recommended maximum
transmission distances and transmitter Pre-Peak switch
positions using Extron Enhanced Skew-Free A/V UTP cable or
UTP CAT 5 cable, terminated with CAT 5 rated connectors.
MTP T 15HD A Architectural Plates • Introduction
Introduction
1-2
1-3
MTP T 15HD A Architectural Plates • Introduction
Composite,
S-video,
Component
640 x 480
<300'
(90 m)
>350'
(105 m)
800'
(245 m)
1000'
(300 m)
700'
(215 m)
750'
(240 m)
800 x 600
<300'
(90 m)
>350'
(105 m)
550'
(165 m)
650'
(200 m)
1024 x 768
<300'
(90 m)
>350'
(105 m)
500'
(150 m)
600'
(185 m)
1280 x 1024
<250'
(75 m)
>300'
(90 m)
350'
(105 m)
450'
(135 m)
1600 x 1200
<250'
(75 m)
>300'
(90 m)
300'
(90 m)
450'
(135 m)
Video
format
Pre-Peak
off
Pre-Peak
on
Max. distance
(high quality)
Max. distance
(variable quality)
Recommended Pre-Peak switch positions and
transmission distances at 60 Hz
N
It is possible to exceed the recommended distance;
however, image quality may be reduced.
N
The transmitters are for use with, and perform best with
Extron Enhanced Skew-Free A/V cable terminated in
accordance with the TIA/EIA T 568 A wiring standard.
CAT 5 cables are acceptable but less preferable. We also
recommend the use of pre-terminated and tested cables.
Cables terminated on site should be tested before use to
ensure that they comply with Category 5 specifications.
N
The recommendations shown in the table above apply
for a single transmitter and an MTP receiver and for
a daisy chain. For example, the maximum suggested
range for 1024 x 768 video is 300’ (90 m) with Pre-Peak
off and 500’ (150 m) with Pre-Peak on whether the
system consists of one transmitter and one receiver or a
transmitter and three daisy-chained receivers.
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
