Surface Access Products • Packaging for Shipment
Surface Access Products • Packaging for Shipment
Packaging for Shipment, Cont’d
6
.
Release (extend) the top panel.
7
.
Insert the HSA 800/802 and the clamshell into one of the
foam shells (figure B-4). Either open end of the clamshell
and the open top panel will fit into the recesses in the
foam.
Figure B-4 — Installing the foam shell
8
.
Insert the opposite end of the HSA 800/802 and the
clamshell into the remaining foam shell (figure B-5).
Firmly push the foam shells together as far as they will go
to completely suspend the HSA and clamshell. The sides
of the clamshell protrude through slots in the foam.
9
.
Lower the foam-protected HSA into the shipping carton
(figure B-6).
10
.
Close the shipping carton and seal it with high quality
shipping tape.
11
.
Ship the HSA to Extron using a reputable shipping
company.
B-5
B-4
Figure B-5 — HSA suspended in the foam
Figure B-6 — Placing the HSA in the shipping
carton
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
