HAI 100 4K PLUS • Configuration
8
HDCP
Input
The HAI 100 4K Plus input authenticates HDCP with the source device if the source requires
HDCP encryption. The authentication process is repeated whenever the stored EDID is
changed or updated.
HDCP support can be disabled using the
SIS command on
page 12.
Output
The output is authenticated and encrypted according to the configured HDCP output mode
(see output modes below). If the output requires encryption but the connected sink device
cannot be authenticated, the HAI 100 4K Plus outputs a green screen.
HDCP output modes
•
Follow input
— Output is always authenticated but only encrypted when required by
input. HDMI authentication is continuous. DVI authentication occurs for a maximum of
10 seconds, then fails. This is the default mode.
•
Always encrypt output
— Output is always authenticated and encrypted. HDMI
authentication is continuous. DVI authentication occurs for a maximum of 10 seconds,
then fails.
•
Follow Input (with continuous DVI trials)
— Output is always authenticated but
only encrypted when required by the input. Both HDMI and DVI authentication are
continuous.
•
Always encrypt output (with continuous DVI trials)
— Output is always
authenticated and encrypted. Both HDMI and DVI authentication are continuous.
