FOXBOX 4G Tx/Rx • Introduction
Introduction, cont’d
1-6
FOXBOX 4G Tx/Rx • Introduction
1-7
Video output
—
FOXBOX 4G VGA —
The receiver outputs RGBHV or
RGsB (user-selectable) on a 15-pin HD connector.
FOXBOX 4G DVI —
The receiver outputs a single link of
DVI-D video on a DVI-I connector.
FOXBOX 4G VGA and FOXBOX 4G DVI are mutually
compatible —
Enables ultra-long distance
DVI-to-analog RGB and analog RGB-to-DVI
conversion without the need for extra signal
conversion devices.
Compatible with FOX 500 DA6 distribution amplifier and
Fiber Matrix 6400 matrix switcher
Audio input —
The transmitters accept a balanced or
unbalanced stereo audio input on a 3.5 mm mini jack.
Audio input gain/attenuation —
The input audio level can be
adjusted within a range of -18 dB (attenuation) to +10 dB
(gain) via the front panel or the RS-232 link.
Audio output —
Balanced or unbalanced stereo audio is output
from the receivers on a 3.5 mm mini jack.
Links monitoring —
The transmitters' and receivers' front
panels have indicators for monitoring image and audio
transmission and both fiber optic links.
Loss-of-light alarms —
The transmitters' and receivers' rear
panels have discrete outputs that indicate if either of the
fiber optic links have suffered a loss of the light signal.
Windows
®
-based control program —
For RS-232 remote control
from a PC, the Extron Windows-based FOX Extender
control software provides a graphical interface and drag-
and-drop/point-and-click operation.
Simple Instruction Set (SIS
™
) —
The transmitters and receivers
use Extron’s SIS for easy remote control operation.
Audio level —
The audio output is at the consumer level
(-10 dBV).
Upgradable firmware —
The firmware that controls each unit's
operation can be upgraded in the field via an RS-232
link, without taking the unit out of service. Firmware
upgrades are available for download on the Extron Web
site,
www.extron.com
, and they can be installed using the
Windows-based control program.
Memory presets —
30 memory presets are a time-saving
feature that lets you store input size and position settings
relative to a specific input resolution. You can then recall
those settings, when needed, using the SIS or the control
software.
Rack mounting —
All FOXBOX 4G Tx and Rx units are rack
mountable in any conventional 19" wide rack, using
Extron's 9.5" or 6" deep rack shelf.
Power —
Each unit's 100 VAC to 240 VAC external power
supply provides worldwide power compatibility.
