Extron electronics DTP2 T 202 FB, User Manual

Page: 13 / 40

DTP2 T 202 FB • Installation and Operation 5
6. Connect cables to the side panel connectors located below the adapter plates (see
Connectors and Switches Below the Adapter Plates on page 7).
7. Mount the DTP2 T 202 FB to the floor box (see Mounting on page 11).
8. Connect appropriate devices to the remaining side connectors (see Connectors
Above the Adapter Plates on page 10) and top panel connectors (see Top Panel
Features on page 11).
9. Configure the DTP2 T 202 FB with SIS commands (see Simple Instruction
Set Control on page 21) or the Product Configuration Software (see Product
Configuration Software on page 28).
Adapter Plates
Each model of floor box requires a specific pair of provided adapter plates to secure the
device to the box (see the table below for the appropriate adapter plates to use with specific
floor boxes).
Floor Box Adapter Plate Example
Ackermann GB3 (OBO Bettermann) 995241
995242
MK Electric CableLink Plus Single Pan 995243
MK Electric CableLink Plus Modular 995244
Electraplan 995300
PUK 995300
NOTE: The 995242 adapter plate is only used for position 2 of the Ackermann GB3
(OBO Bettermann) floor box.
1. Determine the position in the floor box to install the DTP2 T 202 FB. Each compatible
floor box contains three positions to install devices (see
figure 2 on the next page).
NOTE:
For the MK Electric CableLink Plus Single Pan floor box, do not use
position 2.