Installation and Operation, cont’d
DVS 304 • Installation and Operation
2- 10
Figure 2-9 — Main menus
To return to the default screens, let the DVS 304 timeout for 20 seconds, or
press the Menu button until the Exit menu appears, then press the Next button.
Submenus are accessed from a main menu by pressing the Next button. If
you press the Menu button while a submenu is active, the previous main
menu will become active. For example, the menu will change from the Input
Configuration menu or its submenus to the Output Configuration main
menu.
Start auto image
Auto imaging allows you to “auto size” and “auto center” the selected image to
fill the screen. The processor measures the sync frequencies of an incoming
video source and uses an internal table to set the active image area, total image
area, and the sampling frequency.
START AUTO
IMAGE ON IN1
MENU
MENU
INPUT
CONFIG
MENU
PICTURE
CONTROL
MENU
OUTPUT
CONFIG
MENU
AUDIO
CONFIG
MENU
NEXT
MENU
MEMORY
PRESETS
Power
on
EXTRON
DVS 304
2 sec.
2 sec.
INPUT 1
COMPOSITE
60-736-01
FW version 1.00
2 sec.
2 sec.
OUTPUT
1024 x 768@60
Default Cycle
2 sec.
IP
CONFIG
MENU
MENU
ADVANCED
CONFIG
MENU
TO EXIT MENU
PRESS NEXT
(Audio models only)
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
