DVS 304 • Introduction
1-2
Introduction
About this Manual
This manual discusses how to install, configure, and operate the Extron DVS 304
video and RGB scaler and how to operate the optional IR 902 infrared remote
control (part #70-495-01).
Throughout this manual the terms “DVS”, “digital video scaler”, and “scaler”
are used interchangeably to refer to the same product. All instances refer to all
models in the series unless noted otherwise.
About the DVS 304, DVS 304 A, DVS 304 D, and
DVS 304 AD
The DVS 304 series (DVS 304, DVS 304 A, DVS 304 D, and DVS 304 AD ) are
4-input, one output high performance RGB and video scalers offering 59 output
rates, including HDTV. These products provide scaling solutions for
boardrooms, conference rooms, and home theaters, as well as rental and staging
applications.
The two DVS 304 scalers come in a half rack model (DVS 304) with an SDI
option, and a full rack model (DVS 304 A) with an SDI option and balanced/
unbalanced audio.
All versions of the DVS 304 can be controlled remotely using Extron’s Simple
Instruction Set™ (SIS) commands via RS-232, or through an Ethernet LAN
connection using embedded Web pages.
The DVS 304 scales from composite video, S-video, component (Y, R-Y, B-Y)
video, and RGB video to computer-video (RGBHV/RGBS/RGsB) or HD
component. It can also output to two separate display devices via individually
buffered BNC and
15-pin HD connectors.
Controlling the DVS 304 video and RGB scaler
The DVS 304 can be controlled using one or more of the following methods:
•
The front panel controls.
•
A computer, a touch screen panel, or any other device that can send and
receive the serial communications through the RS-232 port. Extron’s
Simple Instruction Set™ (SIS) is a set of simple keystroke commands that
can be used with any such devices, and Extron’s control software for
Windows provides a graphical interface for controlling the scaler from a
computer.
•
The optional IR 902 remote control, replicating most of the front panel
controls.
•
Ethernet control via IP Link enables the DVS 304 to be controlled and
proactively monitored over a LAN, WAN, or the Internet.
Features
Four inputs
:
SDI video input (optional)
— One BNC connector on the rear panel accepts
SDI video.
Input 1
— One BNC connector on the rear panel accepts composite video.
Input 2
— Three BNC connectors on the rear panel accept composite video,
S-video, or component video.
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
