Operation, cont’d
CrossPoint Plus Matrix Switchers • Operation
3-12
3.
The current configuration and all presets are stored in non-volatile
memory. When power is removed and restored, the current configuration
is still active and all presets are retained.
4.
When a preset is recalled, it replaces the current configuration, which is
lost unless it is also stored as a preset. The recalled preset overwrites all of
the current configuration ties in favor of the preset configuration ties.
Example 5: Save a preset
Refer to figure 31 and the following steps for an example of saving the current
configuration as a preset.
1
1
2
2
3
3
4
4
5
5
6
INPUTS
ENTER
OUTPUTS
6
7
7
8
9
10
11
PRESET VIEW
ESC
ESC
RGBHV AUDIO
12
8
CONTROL
I/O
A
1
C
PRESET
B
C
B
B
LED key: = off, = on, = blinking,
= on for 2 seconds, then off
2
2
2
Figure 31 — Example 5: Saving the current configuration as preset 1
A
Press and release the Esc button. The Esc LED turns on for approximately
2 seconds and turns off.
B
Press and hold the Preset button for approximately 2 seconds until the Preset
LED begins to blink, then release the Preset button.
C
Press and release the input 1 button. The input 1 LED turns on for
approximately 2 seconds and turns off. The Preset LED turns off.
Example 6: Recall a preset
Refer to figure 32 and the following steps for an example of recalling a preset to
become the current configuration.
1
1
2
2
3
3
4
4
5
5
6
INPUTS
ENTER
OUTPUTS
6
7
7
8
9
10
11
PRESET VIEW
ESC
ESC
RGBHV AUDIO
12
8
CONTROL
I/O
A
1
C
PRESET
B
C
LED key: = off, = on
= on for 2 seconds, then off
2
2
2
Figure 32 — Example 6: Recalling preset 1
A
Press and release the Esc button. The Esc LED turns on for approximately
2 seconds and turns off.
B
Press and release the Preset button. The Preset LED lights.
C
Press and release the input 1 button. The input 1 LED turns on for
approximately 2 seconds and turns off. The Preset LED turns off. The
configuration stored in memory location 1 is now the current configuration
and can be viewed in the view-only mode (Example 4).
Summary of Contents for CrossPoint 124
