3-11
CrossPoint Plus Matrix Switchers • Operation
for an unlit (untied) output LED. Observe that all of the untied outputs light.
Then press the output button for the output LED noted previously and observe
that the selected output LED, the tied input LED (input 5), and the output
LEDs light for all of the outputs that are tied to the input.
E
Press and release the RGBHV button to toggle the Video LED off (figure 29).
If audio is broken away, the Audio LED stops blinking and lights steadily.
If audio ties are established for input 5, the output LEDs for all audio outputs
tied to input 5 light. If no ties are established for input 5, all output LEDs turn
off.
AUDIO
1
1
2
2
3
3
4
4
5
5
6
INPUTS
ENTER
OUTPUTS
6
7
7
8
9
10
11
PRESET VIEW
ESC
RGBHV AUDIO
12
8
CONTROL
I/O
E
8
3
RGBHV
E
LED key: = off, = on
Figure 29 — Example 4e: Viewing the current configuration, audio-
only
F
Press and release the RGBHV and Audio buttons to toggle the Video LED on
and the Audio LED off (figure 30).
1
1
2
2
3
3
4
4
5
5
6
INPUTS
ENTER
OUTPUTS
6
7
7
8
9
10
11
PRESET VIEW
ESC
RGBHV AUDIO
12
8
CONTROL
I/O
F
8
3
1
4
LED key: = off, = on
RGBHV
AUDIO
F
Figure 30 — Example 4f: Viewing the current configuration, video-only
If video ties are established for input 5, the output LEDs for all video outputs
tied to input 5 light. If no ties are established for input 5, all output LEDs turn
off.
Using presets
The current configuration (configuration 0) can be saved as a preset in any 1 of 16
preset memory addresses. Each CrossPoint Plus switcher has as many presets
available from the front panel as input buttons. On the CrossPoint Plus 84, 88, 124,
and 128, the extra presets can be saved or stored via the RS-232 link only.
1.
Only the audio and video ties are stored and recalled; audio gain settings
are not saved, and they do not change when a preset is recalled.
2.
Presets cannot be viewed from the front panel unless recalled as the
current configuration. Presets can be viewed using Extron’s Windows-
based control program, see chapter 5, Matrix Software, for more details.
Summary of Contents for CrossPoint 124
