Annotator • SIS Programmer’s Guide
5-5
N
If unit does not support or recognize the entered commands, nothing will
happen and no response is issued.
X!
= Input selection, 1 to 7
X@
= Output selection:
0 = All outputs (default)
1 = Program only (BNC, MTP, optional output card)
2 = Preview only (VGA)
3 = None
X#
= Input video format:
1 = RGB (default)
2 = YUVp/HDTV
3 = RGBcvS
4 = YUVi
5 = S-video
6 = Composite video
7 = SDI
8 = HD-SDI
9 = DVI
10 = Auto detect
X$
= H/V start — 0 to 255
(default midpoint = 128)
X^
= Pixel phase — 0 to 31 (default = 16)
X&
= Total pixels — (±512 of the default value)
X*
= Active pixels — (±512 of the default value)
X(
= Active lines — (±512 of the default value)
X1)
= Off/disable (0) or On/enable (1)
X1!
= Input standard:
0 = No signal
1 = NTSC
2 = PAL
4 = SECAM
- = N/A (occurs when input is set to a high resolution signal format)
X1@
= Internal temperature (in degrees Celsius)
X1#
= Horizontal and vertical frequencies (format is three digit with single decimal
and leading zeros e.g., 075.3)
X1%
= Picture adjustment — 0 to 127 (default 64)
X1^
= H and V position (zero location is 2048, and limits are ± the output resolution)
X1&
= H and V size (0 to 200% of the output area, in single pixel increments)
X1*
= Zoom (100 to 500%)
Default for low resolution video = 111%
Default for high resolution video = 100%
X1(
= Pan — 0 to 200 (default = 100 center point)
