3
Cut the hole in the table and pre-drill mounting holes
CAUTION:
Wear safety glasses when operating power equipment. Failure to comply can result in eye injury.
ATTENTION :
Portez des lunettes de sécurité lorsque vous utilisez l’équipement électrique. Ne pas respecter cela peut
conduire à une blessure à l’oeil.
ATTENTION:
The opening in the table for the Cable Cubby should be cut only by licensed and bonded craftspeople.
Exercise care to prevent scarring or damaging the furniture.
ATTENTION :
L’ouverture dans la table pour le Cable Cubby devrait être coupée seulement par des artisans autorisés et
qualifiés. Faites attention à ne pas faire de marques sur le meuble et à ne pas l’endommager.
For one or two enclosures, the cut-out dimensions and mounting hole locations are shown below. For more enclosures, multiply
the length accordingly. If necessary, pre-drill into the furniture at the keyhole and mounting hole locations.
NOTE:
Diagrams shown above are not drawn to scale.
Dimensions and cut-out templates are available online at
www.extron.com
.
10"
(254 mm)
SURFACE
CUT-OUT
AREA
1
/
16
" (1.5 mm)
4
1
/
4
"
(108 mm)
+
-
Mounting Holes (16)
11.5"
(292 mm)
12"
(305 mm)
5"
(127 mm)
SURFACE
CUT-OUT
AREA
1
/
16
" (1.5 mm)
4 1/4"
(108 mm)
+
-
1.5"
(38 mm)
7"
(178 mm)
1.5"
(38 mm)
3"
(76 mm)
6"
(152 mm)
6.5"
(165 mm)
6.5"
(165 mm)
Mounting Holes (8)
6"
(152 mm)
6.5"
(165 mm)
3"
(76 mm)
1.5"
(38 mm)
1.5"
(38 mm)
Keyholes (4)
Keyholes (2)
2.0"
(51 mm)
