+/- 10 min.
revision Table
ZONE
REV.
DESCRIPTION
DATE
APPROVED
unless otherwise specified: DIMENSIONS ARE IN MM
A4
PROJECT
NUMBER
TITLE
COMMENTS:
WEIGHT in kg
MATERIAL
CC_FT_gemonteerd_man
ual
3.85
23/05/2013
DATE CREATED
DATE MODIFIED
23/05/2013
1:10
PROPRIETARY AND CONFIDENTIAL: THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF EXTREMIS. ANY REPRODUCTION
IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF EXTREMIS IS PROHIBITED.
FINISH
DRAWN
SCALE
4. Position the frame on the shell as shown in the figure
above and fasten it by means of 4 hexagon socket bolts
M6x16.
2. Turn the frame upside down and put a rubber ring and
a foot on each of the legs.
3. Put the shell upside down on a soft surface with the
opening facing backwards so that you do not damage
the shell.
1. Turn the frame upside down and put a rubber ring and
a chair castor on each of the 4 legs.
ASSEMBLY PAW CHAIR
WHAT YOU NEED
no. 4 hex key
plastic hammer
1 person
english 7