+/- 10 min.
6. Tie a double knot in the elastic
and trim off any excess.
7. Repeat these steps on the other
side.
3. Pass the elastic once again
through the first hole, upward
from below.
4. Then wind the elastic around the
frame’s horizontal element
(downward from above) and pass
it through the next hole. Proceed
in the same way until you reach
the last hole.
5. When you have passed the elastic
through the last hole, wind it around
the outer vertical elemenet of the
frame, then under the horizontal
element and pass it once again
through the last hole downward
from above.
1. Pass the elastic through the first
hole. Make sure that the knot is
located on the underside of the
storage net.
2. Then wind the elastic around the
outer vertical element of the
frame and under horizontal
element.
ASSEMBLY STORAGE NET
WHAT YOU NEED
scissors
1 person
10 assembly storage net + maintenance