background image

Connector

The 300 W and 1000 W AC power supplies use an IEC 60320 C16 AC power cord connector. The

AC power cord is in close proximity to the hot-air exhaust, and supports high operating

temperatures.

The 1000 W AC power supplies use an IEC 60320 C16 AC power cord connector. The AC power

cord is in close proximity to the hot-air exhaust, and supports high operating temperatures.

Figure 2: IEC 60320 C16 connector

Power over Ethernet Plus specifications

Table 2: VSP 4850GTS and 4850GTS-PWR+ models

Maximum PoE+ W

Average PoE+ W on 50 port model

855 W with one power supply

1855 W with two power supplies

15.4 W (802.3af)

17.8 W (802.3.at) — One power supply

32.4 W (802.3at) — Two power supplies

• VSP 4850GTS-PWR+ can support 802.3af 15.4 W on each port with one power supply

installed. You can add a second power supply for redundancy.

• VSP 4850GTS-PWR+ can support 802.3at 32.4 W on each port with two power supplies

installed. PoE+ power reduces to an average of 17.8W on each port with one power supply.

Table 3: VSP 4450GSX-PWR+ model

Maximum PoE+ W

Average PoE+ W on 12 ports

835 W with one power supply

1835 W with two power supplies

17.8 W or 32.4 W (802.3.at) — One power supply

Installing the Virtual Services Platform 4000

power supply

You must install at least one power supply before using the switch. VSP 4000 models support two
field replaceable external power supplies. If supported, you can install an optional second power
supply for redundancy, load sharing, or to provide additional PoE+ power budget.

Perform the following procedure to install an external power supply into your switch.

November 2017

Installation Job Aid for VSP 4850GTS

9

Summary of Contents for 4850GTS












Reviews:

Related manuals for 4850GTS