manualshive.com logo in svg

EXTREME SWITCHING 4850GTS, Installation Job Aid

The "EXTREME SWITCHING 4850GTS" Installation Job Aid manual is available for free download on our website. This comprehensive guide provides step-by-step instructions and troubleshooting tips for effortless installation. Maximize the performance of your product by easily accessing the user manual at manualshive.com.

Share
Download
background image

Installation Job Aid for VSP 4850GTS

Release 6.1.0.0

NN46251-308

Issue 02.01

November 2017

Notices

Notice paragraphs alert you about issues that require your attention. The following paragraphs
describe the types of notices used in this guide.

Note:

Notes provide tips and useful information regarding the installation and operation of products.

Electrostatic alert:

ESD

ESD notices provide information about how to avoid discharge of static electricity and
subsequent damage to products.

Caution:

Caution notices provide information about how to avoid possible service disruption or damage to
products.

Warning:

Warning notices provide information about how to avoid personal injury when working with
products.

Voltage:

Danger — High Voltage notices provide information about how to avoid a situation or condition
that can cause serious personal injury or death from high voltage or electric shock.

Danger:

Danger notices provide information about how to avoid a situation or condition that can cause
serious personal injury or death.

©

 2017, Extreme Networks, Inc.

All Rights Reserved.

1

Summary of Contents for 4850GTS












Reviews:

No comments

Related manuals for 4850GTS

Brands by name

Popular brands

Load more brands