1 Determine the spot on the wall where the AP is to be mounted, preferably high up on the wall (near
the ceiling for maximum radio wave dispersion) but in reach of the Ethernet cable and a wall power
outlet if the application does not use Power over Ethernet.
Figure 7: Mounting the AP3805 to a Wall or Ceiling
Table 9: Mounting the AP3805 to a Wall or Ceiling
Item
Description
Quantity
1
Wall or ceiling
n/a
2
Wall anchor (quantity 2)
2
3
Wall bracket
1
4
AP mounting screws
2
5
Mounting bracket screws
2
2 Drill two holes in the wall to match the center of the two keyhole slots in the back of the AP bracket
(
item 3
). For a tight fit, the holes should be slightly smaller than the diameter of the provided plastic
anchors.
3 Screw the anchors (
item 2
) into the holes until they are flush with the wall, and screw the provided
mounting screws (
item 5
) into the anchors.
Installation
ExtremeWireless™ WS-AP3805-FCC/ROW Installation Guide
16