Antennas
The AP3805 can transmit from multiple antennas at the same time, as defined with MIMO operation,
but the antennas must be selected manually based on customer requirements and coverage area.
Kensington Lock Slot
There is a slot for a Kensington lock on the bottom of the AP. See Kensington lock documentation for
instructions on how to use the lock.
Reset Button
The AP3805 provides a Reset button (Item 1 in the following graphic) to reset or restore factory default
configurations. Use a pen tip or a nail to press the switch button through the hole (located on the front
of the AP). If you hold down the button for less than 5 seconds, the AP3805 performs a software
interrupt, causing the AP to drop all connections and reset. If you hold the button down for 5 seconds or
more, any configuration changes are removed, and the factory default configuration restores to the AP.
Figure 4: AP3805 Reset Button
Overview
ExtremeWireless™ WS-AP3805-FCC/ROW Installation Guide
11