Table 38: Environmental Specifications
Operating temperature
0°C to 50°C (normal operation)
Storage temperature
-40°C to 70°C
Operating humidity
93% relative humidity, non-condensing at 30C
Operational shock
30 m/s
2
(3 G)
Power Cord Requirements for AC-Powered Switches and AC
Power Supplies
An AC power cord is not included with the AC power supply.
Power cords used with AC-powered switches or AC power supplies must meet the following
requirements:
•
The power cord must be agency-certified for the country of use.
•
The power cord must have an IEC320-C13 connector for connection to the switch or power supply.
•
The power cord must have an appropriately rated and approved wall plug applicable to the country
of installation.
•
For cords up to 6 feet (2 m) long, the wire size must be 18 AWG (.75 mm
2
) minimum; over 6 feet, the
minimum wire size is 16 AWG (1.0 mm
2
).
The power cords for switches that use either the 1100 W or 715 W power supplies are keyed with a
“notch” to ensure the proper orientation when plugged in. These cords are of 3x14 AWG.
For details about obtaining AC power cords for use in your country, refer to
www.extremenetworks.com/product/powercords/
Technical Specifications
VSP 4900 Series Switches: Hardware Installation Guide
66
