Extreme Networks Summit WM3600, Installation Manual

Page: 6 / 47

Introduction
Summit WM3600 Wireless LAN Controller Installation Guide
6
CAUTION
Care is required. Disregarding a caution can result in data loss or equipment malfunction.
WARNING!
Indicates a condition or procedure that could result in personal injury or equipment damage.
Warnings
●
Read all installation instructions and site survey reports, and verify correct
equipment installation before connecting the system to its power source.
●
Remove jewelry and watches before installing this equipment.
●
Install the equipment in a rack with adequate dimensions and weight allowances.
●
Verify the rack is anchored and cannot tip over or break away from its mountings.
●
Verify the unit is grounded before connecting it to the power source.
●
Verify any device connected to this unit is properly wired and grounded.
●
Connect all power cords to a properly wired and grounded electrical circuit.
●
Verify the electrical circuits have appropriate overload protection.
●
Attach only approved power cords to the device.
●
Extreme Networks strongly recommends the use of an Uninterruptible Power
Supply (UPS) that supports the Summit WM3600 wireless LAN controller power
rating. Not using a UPS can result in data loss or equipment damage due to a power
surge or power failure.
●
Verify that the power connector and socket are accessible at all times during the
operation of the equipment.
●
Do not work with power circuits in dimly lit spaces.
●
Do not install this equipment or work with its power circuits during thunderstorms
or other weather conditions that could cause a power surge.
●
Verify there is adequate ventilation around the device, and ambient temperatures
meet equipment operation specifications.