1
Overview
Package Contents
Power Connections
LEDs
SA201 Side Ports
The SA201 is an Open Networking Adapter IoT (Internet of Things) solution that is used to securely
deploy IoT devices. SA201 adapter can be used to provide proxy service for the Defender Adapter
Application. SA201 has a full layer 1-7 visibility and can be paired 1:1 with a medical or IoT device in a
hospital or campus environment. The SA201 solution capabilities include:
•
Isolation of traffic into encrypted zones using HyperSec technology set. This helps reduce the attack
surface and mitigates ill intended lateral movement toward sensitive areas of the network.
•
Protection of IoT devices from being seen from harmful traffic such as viruses and malware.
•
Filteration of tarffic flows by limiting what the device receives and transmits.
•
Use of Follow Me profiles that are set centrally and applied on a by-device basis. This helps in
automatic assignment of profiles when the device is connected or disconnected from the network.
Note
The SA201 requires a minimum base firmware of Defender 3.1. For Cloud, the minimum base
firmware is ExtremeCloudTM Appliance 4.26.02.
Package Contents
Verify the box contents of the SA201 Adapter as listed:
•
SA201 Defender Adapter
•
Two M4 wood screws; the head may be up to 2.5mm thick. Screw dimension: 3.5x25.4mm
•
Two screw-in wall anchors
•
SA201 Quick Reference Guide
•
ExtremeCloud
™
Quick Start Card
Power Connections
Power Sources
The SA201 Adapter uses Power over Ethernet (PoE) as follows:
Extreme Networks SA201 Defender Adapter
4
