Extreme Networks Policy Manager Page 72 User Manual Download | Manualshive

Page: 72 / 82

background image

Help Messages

Extreme Networks Policy Manager (EPM) 1.2 User Guide

72

sys_IcmpInDestUnreachs

- The number of ICMP Destination Unreachable messages received.

sys_IcmpInTimeExcds

- The number of ICMP Time Exceeded messages received.

sys_IcmpInParmProbs

- The number of ICMP Parameter Problem messages received.

sys_IcmpInSrcQuenchs

- The number of ICMP Source Quench messages received.

sys_IcmpInRedirects

- The number of ICMP Redirect messages received.

sys_IcmpInEchos

- The number of ICMP Echo (request) messages received.

sys_IcmpInEchoReps

- The number of ICMP Echo Reply messages received.

sys_IcmpInTimestamps

- The number of ICMP Timestamp (request) messages received.

sys_IcmpInTimestampReps

- The number of ICMP Timestamp Reply messages received.

sys_IcmpInAddrMasks

- The number of ICMP Address Mask Request messages received.

sys_IcmpInAddrMaskReps

- The number of ICMP Address Mask Reply messages received.

sys_IcmpOutMsgs

- The total number of ICMP messages which this entity attempted to send. Note that

this counter includes all those counted by icmpOutErrors.

sys_IcmpOutErrors

- The number of ICMP messages which this entity did not send due to problems

discovered within ICMP such as a lack of buffers. This value should not include errors discovered
outside the ICMP layer such as the inability of IP to route the resultant datagram. In some
implementations there may be no types of error which contribute to this counter's value.

sys_IcmpOutDestUnreachs

- The number of ICMP Destination Unreachable messages sent.

sys_IcmpOutTimeExcds

- The number of ICMP Time Exceeded messages sent.

sys_IcmpOutParmProbs

- The number of ICMP Parameter Problem messages sent.

sys_IcmpOutSrcQuenchs

- The number of ICMP Source Quench messages sent.

sys_IcmpOutRedirects

- The number of ICMP Redirect messages sent.

sys_IcmpOutEchos

- The number of ICMP Echo (request) messages sent.

sys_IcmpOutEchoReps

- The number of ICMP Echo Reply messages sent.

sys_IcmpOutTimestamps

- The number of ICMP Timestamp (request) messages sent.

sys_IcmpOutTimestampReps

- The number of ICMP Timestamp Reply messages sent.

sys_IcmpOutAddrMasks

- The number of ICMP Address Mask Request messages sent.

sys_IcmpOutAddrMaskReps

- The number of ICMP Address Mask Reply messages sent.

sys_IcmpInProtoUnreachs

- The number of incoming ICMP packets addressed to a not-in-use/

unreachable/ invalid protocol. This message is in the general category of ICMP destination unreachable
error messages.

sys_IcmpInBadLen

- The number of incoming bad ICMP length packets.b

«
...
70
71
72
73
74
...
»

Summary of Contents for Policy Manager



















































































Reviews:

No comments

Related manuals for Policy Manager

Brand: Navitar Pages: 23

Jetstream CPX-1000

Brand: Paradyne Pages: 93

Brand: NAPCO Pages: 1

Brand: Lexmark Pages: 3

Membrain Software

Brand: SanDisk Pages: 14

BJ0NJML - Service And Asset Management

Brand: IBM Pages: 330

Brand: ScanSoft Pages: 94

Brand: Fortinet Pages: 4

DIRECTOR MX 2004-USING DIRECTOR

Brand: MACROMEDIA Pages: 500

ZVSE PARALLEL ACCESS

Brand: IBM Pages: 10

App for Android

Brand: TomTom Pages: 58

Brand: IBM Pages: 354

Brand: Paradyne Pages: 24

NetAtlas Workgroup

Brand: ZyXEL Communications Pages: 242

Brand: Vonamic Pages: 31

Network HotSync

Brand: 3Com Pages: 38

Brand: Cyber Sciences Pages: 2

MapCreate Canada 6.3 Topo Addendum

Brand: LEI Extras Pages: 1

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands