•
T-bar must be structurally sound.
•
T-bar maximum base thickness must not exceed 0.055 in. (1.400 mm).
•
Ceiling tile over the T-bar must be flat, all the way across.
About This Task
The main mounting bracket is used on a T-bar when the ceiling model is a suspended or drop ceiling
and when there is a T-bar on the ceiling.
Procedure
1. Remove the ceiling tiles.
2. Push and rotate the main mounting bracket on the T-bar in such a way that the center angled
locking tabs of the main bracket gets attached to the T-bar.
Figure 4: Install the main mounting bracket on a T-bar
3. Attach the RJ45 connector to the GE1 port.
Install the Access Point
Install the Access Point on a Flat T-bar Using Main
Mounting Bracket
ExtremeWireless™ Access Points AP410i/e
21