Extreme Networks ExtremeWireless AP3965e, Installation Manual, Page: 40 / 56

Regulatory Information AP3965
34
AP3965
Unless noted otherwise, the following regulatory information applies to both the AP3965i and the
AP3965e.
AP3965e External Antenna AP
The AP3965e must be used only with certified external antennas. Any unused antenna ports must
be terminated.
For a list of approved external antennas, see “ External Antennas ” on page 30.
United States
FCC Declaration of Conformity Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
USA Conformance Standards
This equipment meets the following conformance standards:
Safety
• UL 60950 ‐ 1
Warning
Electrical Hazard: Only qualified personnel should perform installation
procedures. Within the context of the safety notes in this documentation
qualified persons are defined as persons who are authorized to commission,
ground and label devices, systems and circuits in accordance with established
safety practices and standards. A qualified person understands the
requirements and risks involved with installing outdoor electrical equipment in
accordance with national codes.