Installation
AP3965 Installation Procedures
10
Figure 2-3 Mounting the AP3965 to a Wall
Mounting the AP3965 to a Pole
To
fit
the
mounting
plate
to
a
pole:
1.
Determine
the
diameter
of
the
pole.
2.
Attach
the
AP
to
the
“H”
bracket
on
the
side
that
does
not
have
the
PEM
stand
‐
offs.
Tighten
the
four
screws
to
a
torque
of
12.0
in
‐
lbs.
3.
Using
four
M4
screw
assemblies,
attach
the
pole
bracket
onto
the
“H”
bracket.
Tighten
the
screws
to
12.0
in
‐
lbs.
4.
Position
the
pole
mount
bracket
(see
Figure 2
‐
4
)
onto
the
AP
mounting
bracket.
Note:
Use anchors when mounting on cement walls. (Not shown above.) Mounting screws (shown
above) are not included.
Pole Diameter
Cable Clamp Size
<= 2.5” [63.5mm]
Use small cable clamp.
6” - 7” (178mm)
Use large cable clamp
Note:
For other pole diameters, provide your own stainless steel cable clamp. The band must be ½”
[12.7mm] wide.
Summary of Contents for ExtremeWireless AP3965e
