Extreme Networks ExtremeWireless AP3935e Installation Manual Download Page 38

5470-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux
dispositifs LAN-EL.

Pour le produit disponible sur le marché canadien, seuls les canaux 1 à 11 peuvent être utilisés. Il est
impossible de sélectionner d’autres canaux dans la bande de 2.4 GHz.

Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner
avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par
Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des
autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope
rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une
communication satisfaisante.

Canada Conformance Standards

This equipment meets the following conformance standards:

Safety

C22.2 No.60950-1-03

EMC

ICES-003, Class B

Radio transceiver

RSS-247 (2.4 GHz and 5 GHz)

Other

IEEE 802.11ac (5 GHz)

IEEE 802.11b/g (2.4 GHz)

IEEE 802.11n

IEEE 802.3at (PoE)

IEEE 802.3af (PoE)

RF Safety Distance

The antennas used for this transmitter must be installed to provide a separation distance of at least 34
cm from all persons and must not be co-located or operating in conjunction with another antenna or
transmitter.

Les antennes de ce transmetteur doivent être installées à une distance d’au moins 34 cm de toute
personne et ne doivent pas être en placées à proximité immédiate ou utilisées conjointement avec une
autre antenne ou un autre transmetteur

European Community

The ExtremeWireless AP3935 is designed for use in the European Union and other countries with
similar regulatory restrictions where the end user or installer is allowed to configure the
ExtremeWireless AP3935 for operation by entry of a country code relative to a specific country. After
the country code is selected, the ExtremeWireless AP3935 uses the proper frequencies and power
outputs for that country code.

Regulatory Information

ExtremeWireless™ AP3935i & AP3935e Installation Guide

38

Summary of Contents for ExtremeWireless AP3935e













































Reviews: