B
Regulatory Information
ExtremeWireless AP3935i and AP3935e
Warning
Warnings identify essential information. Ignoring a warning can lead to problems with the
application.
This appendix provides regulatory information for the ExtremeWireless AP3935i and AP3935e access
points.
Note
Throughout this appendix, the term ExtremeWireless AP3935 refers to the AP models
AP3935i, and AP3935e. Specific AP models are identified in this appendix only where it is
necessary to do so.
Warning
Changes or modifications made to the ExtremeWireless AP3935 that are not expressly
approved by Extreme Networks could void the user's authority to operate the equipment.
Only authorized Extreme Networks service personnel are permitted to service the system.
Procedures that should be performed only by Extreme Networks personnel are clearly
identified in this guide.
ExtremeWireless AP3935i and AP3935e
The following regulatory information applies to the ExtremeWireless access points AP3935i and
AP3935e.
United States
FCC Declaration of Conformity Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
•
This device may not cause harmful interference.
•
This device must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a residential and business environment. This
equipment generates, uses, and radiates radio frequency energy, and if not installed and used in
accordance with instructions, may cause harmful interference. However, there is no guarantee that
interference will not occur. If this equipment does cause harmful interference, which can be determined
ExtremeWireless™ AP3935i & AP3935e Installation Guide
35