manualshive.com logo in svg

Extreme Networks ExtremeWare Enterprise Manager, Installation And User Manual

Download the free "ExtremeWare Enterprise Manager" installation and user manual from our website. This comprehensive manual provides step-by-step instructions for setting up and using the Extreme Networks software. Unlock the full potential of this powerful product with our easy-to-follow manual, available exclusively at manualshive.com.

Share
Download
background image

E

XTREME

W

ARE

 E

NTERPRISE

 M

ANAGER

 I

NSTALLATION

 

AND

 U

SER

 G

UIDE

2-9

  

I

NSTALLING

 

ON

 

A

 SPARC S

OLARIS

 S

YSTEM

/opt/eem20: No such directory.  Do you wish to create it? (y/n)[y] 

Assuming you want to create the directory, accept Y as the default. If you answer N, 
the script will assume the directory already exists. 

7

The installation script now copies and installs the ExtremeWare Enterprise Manager 
files:

Installing ExtremeWare Enterprise Manager files...

After copying a number of files, the following message appears:

File copy complete.

Configuring Installation.

At this point additional files are copied and the ExtremeWare Enterprise Manager 
installation tree is created, and filled out. This will take several minutes. 

When the files are complete, you are asked for a set of configuration information. 

To configure ExtremeWare Enterprise Manager (EEM), we will need to

ask you for some information.  In most case the default answers

will work correctly.

8

First you are asked whether you want to upgrade from a previous version of 
ExtremeWare Enterprise Manager.

*** Upgrade Parameters

If there is a previous installation of EEM installed,

you may import the database and the license from the previous

installation.  If there is no previous install, or you would

like to start from scratch, select new installation.

Would you like to upgrade from a previous install? (Y/N) [N]:

Answer Y to upgrade.

If you answer Yes, the install script asks for the location of the previous version of 
ExtremeWare Enterprise Manager. 

Old install directory [/opt/eem]: /opt/eem1.1

Accept the default or enter the actual location (full path name). 

9

Next, you are asked for a license key. 

*** License Key

Please enter the license key for the product.

Summary of Contents for ExtremeWare Enterprise Manager









































































































































































































































































Reviews:

No comments

Related manuals for ExtremeWare Enterprise Manager

VMware VCENTER CHARGEBACK 1.5 - API Manual preview
VCENTER CHARGEBACK 1.5 - API
Brand: VMware Pages: 150
FARONICS DEEP FREEZER PROFESSIONAL Manual preview
DEEP FREEZER PROFESSIONAL
Brand: FARONICS Pages: 31
Paradyne OPENLANE User Manual preview
OPENLANE
Brand: Paradyne Pages: 86
Brady markware User Manual preview
markware
Brand: Brady Pages: 33
Seagate FreeAgent Desk Quick Start Manual preview
FreeAgent Desk
Brand: Seagate Pages: 1
Red Hat CERTIFICATE 7.2 RELEASE NOTES Release Note preview
CERTIFICATE 7.2 RELEASE NOTES
Brand: Red Hat Pages: 24
Avision FS-5900C User Manual preview
FS-5900C
Brand: Avision Pages: 47
DivX 10 User Manual preview
10
Brand: DivX Pages: 59
360 Systems Maxx 2470-HD Operation Manual preview
Maxx 2470-HD
Brand: 360 Systems Pages: 58
MINOLTA-QMS Crown Document Option Commands Reference Manual preview
Crown Document Option Commands
Brand: MINOLTA-QMS Pages: 134
beat buddy MANAGER Manager Manual preview
MANAGER
Brand: beat buddy Pages: 33
Fiat Formidable mOByDic 3210 Series User Manual preview
Formidable mOByDic 3210 Series
Brand: Fiat Pages: 17
IBM AH0QXML - Lotus Domino Messaging User Manual preview
AH0QXML - Lotus Domino Messaging
Brand: IBM Pages: 120
Tandberg Data B DLTSAGE INTEGRATION Integration Manual preview
B DLTSAGE INTEGRATION
Brand: Tandberg Data Pages: 36
ICP GDTMON Manual preview
GDTMON
Brand: ICP Pages: 60
Quantum GoVault 40GB Software Manual preview
GoVault 40GB
Brand: Quantum Pages: 142
Lucent Technologies INTUITY Messaging Solutions Manual preview
INTUITY Messaging Solutions
Brand: Lucent Technologies Pages: 80
Agilent Technologies Agilent NanoSuite 6.2 Datasheet preview
Agilent NanoSuite 6.2
Brand: Agilent Technologies Pages: 4

Brands by name

Popular brands

Load more brands