Extreme Networks ExtremeWare Enterprise Manager, Installation And User Manual

Page: 35 / 264

E
XTREME
W
ARE
E
NTERPRISE
M
ANAGER
I
NSTALLATION AND
U
SER
G
UIDE
2-5
I
NSTALLING ON A
W
INDOWS
NT S
YSTEM
If you answer Yes, an MS-DOS window will appear briefly while the database
contents are dumped from the old 1.x database and loaded into the 2.0 database.
18 If HP OpenView is installed on the system where you are installing the ExtremeWare
Enterprise Manager server, the installation software asks if you want to integrate
with HP OpenView. Integration allows access to the ExtremeWare Enterprise
Manager and ExtremeWare Vista from the HP OpenView user interface.
If HP OpenView is installed, you can do the installation at this time.
If HP Openview is not installed on this system, you will not see this prompt. You
can run the HP OpenView integration process separately on the system where HP
OpenView is installed.
—
To run the HP OpenView integration process now, click Yes. Then go to
“Integrating with HP OpenView under Windows NT” in Appendix A and follow
the instructions.
— To skip the HP OpenView integration process, click No.
19 If you want to view the Readme file, click the check box, then click Finish to
complete the installation process.
20 Finally, you are asked whether you want to reboot your system. If you choose not to
do so at this time, you must reboot the server before you can run the ExtremeWare
Enterprise Manager server software.
U
PDATING AN
E
VALUATION
V
ERSION TO A
L
ICENSED
V
ERSION
To update an evaluation copy of the ExtremeWare Enterprise Manager to a
fully-licensed copy, use the utility provided.
Note:
DO NOT reinstall the software if you have any data or configurations of value in
the Enterprise Manager database. Re-installation will re-initialize the database.
To update an evaluation copy, follow these steps:
1 Click Start.
2 Highlight Programs to display the Programs menu.
3 Highlight Command Prompt in the Programs menu to display a command window.
4 Enter the command
< install_dir>/instlic <key>
<install_dir>
is the directory (path) where you installed the Enterprise Manager
components. If you installed in the default directory, the path is
c:\EEM2_0\