Extreme Networks ExtremeSwitching X440-G2 Series, Hardware Installation Manual

Page: 164 / 413

Table 77: Matrix of Switches and Stacking Methods
Stack with X440-
G2
1
X450-
G2
2
X460-
G2
1
X590
3
X465 X620 X670-
G2
4
X690 X695 X870
X440-G2
1
V V V V V
X450-G2
2
V V
V84
V V V
X460-G2
1
V V 40G
SS
V
V160
V V
V160
X590
3
V400 V160 V400 V400 V400
X465 V160 V160 V160
X620 V V V V V
X670-G2
4
V V V
V160
V V
V80
(support
ed in
EXOS
30.1 and
prior
releases)
V160
V320
X690 V400 V160 V400 V400 V400
X695 V400 V160 V400 V400 V400
X870 V400 V400 V400 V400
Note
1 For X440-G2 and X460-G2, SummitStack-V is available only on 10G models.
2 For X450-G2, SummitStack-V is available only on 10G models. SummitStack-V84 is
available only in stacks that consist entirely of X450-G2 switches.
3 The X590 is not supported with ExtremeXOS version 30.1.
4 The X670-G2-72x can stack only with SummitStack V using front panel 10G ports.
In a stack that has switch models from more than one series, we recommend that the stack master and
backup nodes be from the same switch series. For example, if an X460-G2 switch is the stack master,
the backup node should also be an X460-G2 switch. Refer to the list in
Master/Backup Switch
Redundancy on page 138.
Stack configuration, easy setup, and redundancy are fully described in the ExtremeXOS 22.6 User Guide .
ExtremeSwitching switches can be stacked in the combinations listed in Table 78 on page 165. For each
combination, one or more of the following stacking methods are displayed:
40G 40G mode (X460-G2 switches with VIM)
Building Stacks
ExtremeSwitching and Summit Switches: Hardware Installation Guide 164