35
ExtremeSwitching SLX 9140 Hardware Installation Guide
9036857-00 Rev AA
Installing the Universal Four-Post Rack Kit (XBR-R000296)
FIGURE 25
Attaching the rear brackets to the extensions at the front of the device
FIGURE 26
Attaching the short or long rear brackets to the extensions
Attaching the rear brackets to the front rack posts
Complete the following steps to attach the rear brackets to the front rack posts.
1.
Attach the right rear bracket to the right front rack post using two 10-32 x 5/8-in. screws and two retainer nuts, as shown in
. Use the upper and lower holes in the bracket.
2.
Attach the left rear bracket to the left front rack post using two 10-32 x 5/8-in. screws and two retainer nuts. Use the upper and
lower holes in the bracket.
3.
Tighten all the 10-32 x 5/8-in. screws to a torque of 25 in-lb (29 cm-kg).
1
Rear brackets, short
2
Screws, 6-32 x 1/4-in., panhead Phillips
1
Rear bracket, short or long
2
Screws, 6-32 x 1/4-in., panhead Phillips
