TABLE 18
Initial setup and configuration checklist (continued)
Task
Task details or additional information
Interpreting power supply module LEDs
on page 80,
•
The following commands can be useful to establish an
operational baseline for the device. Refer to
Extreme SLX-OS
Monitoring Configuration Guide
for the SLX 9850 Router for
more information about these commands.
–
show chassis
–
show system
–
show slots
–
show linecard
–
show environment fan
–
show environment power
–
show environment sensor
–
show environment temp
Back up the configuration.
Use the
copy running-config
command to copy the running configuration
to the startup configuration. Refer to the
page 73 for more information about this command.
Items required
The following items are required for initial setup and verification of the device:
•
The device, mounted and installed with the required interface modules, FRUs, transceivers, and cables, and connected to a
power source.
•
A workstation computer with an installed terminal emulator application, such as HyperTerminal for Windows.
•
An unused IP address with corresponding subnet mask and gateway address.
•
A serial cable (provided) with an RJ-45 connector.
•
Two Ethernet cables (one per management module).
•
Optional: Access to an FTP server or USB device for backing up (uploading) or downloading the device configuration or
collecting diagnostic output data.
•
Optional: An Extreme USB drive for backing up (uploading) or downloading the device configuration or collecting diagnostic
output data.
Providing power to the device
To provide power to the device, follow the steps in the following sections. To find power supply requirements for the device, refer to the
power supply specifications section in the
ExtremeRouting SLX 9850 Technical Specifications
Complete the following steps to provide power to the chassis.
Items required
ExtremeRouting SLX 9850-4 Hardware Installation Guide
58
9035474-02 Rev AA
Summary of Contents for ExtremeRouting SLX 9850-4
