manualshive.com logo in svg

Extreme Networks ExtremeCloud Appliance E1120, User Manual

The Extreme Networks ExtremeCloud Appliance E1120 User Manual is a comprehensive guide to help you make the most of your networking appliance. Available for free download at manualshive.com, this manual provides detailed instructions, troubleshooting tips, and configuration guidance, ensuring a seamless user experience with this high-performance product.

Share
Download
background image

Figure 14: Client Actions Button

Table 15: Client Actions

Field

Description

Delete

Delete a client from the network.

•

The client is removed from groups of which it was a member.

•

The client 

remains

 on a blacklist or whitelist, if it was included on a

list before deletion.

•

Also Delete User Registrations

 indicates whether or not the user

registrations are being deleted along with the client/end-system.

Disassociate

Users are disassociated from the AP. Consequently, the users must log
on again and be authenticated on ExtremeCloud Appliance before the
wireless service is restored.

Reauthenticate

The authentication state is not preserved during fast failover. If a
WLAN Service requires authentication, the client device must
reauthenticate. The session availability is not guaranteed because
authentication may require additional time during which the user
session may be disrupted.
Use this option to manually reauthenticate one or more clients.

Add to group

Adds selected clients to a group. Check 

Force Reauthentication 

to

automatically reauthenticate the client to the network.

Remove from group

Removes selected clients from the group. Check 

Force

Reauthentication 

to automatically reauthenticate the client to the

network.

Related Links

Network Snapshot: Clients Dashboard

 on page 55

Whitelisting and Blacklisting Clients

 on page 54

Understanding Client Status

 on page 54

Network Snapshot: Clients Dashboard

The Clients screen displays information and details about a specific client, as well as the client location
on a mapped floor plan.

Monitor

ExtremeCloud Appliance User Guide for version 4.36.03

55

Summary of Contents for ExtremeCloud Appliance E1120




























































































































































































































Reviews:

No comments

Related manuals for ExtremeCloud Appliance E1120

Farallon NetLINE USB User Manual preview
NetLINE USB
Brand: Farallon Pages: 26
Observint N16 Quick Setup Manual preview
N16
Brand: Observint Pages: 11
IEI Technology WSB-H610 User Manual preview
WSB-H610
Brand: IEI Technology Pages: 187
IEI Technology TANK-XM811 User Manual preview
TANK-XM811
Brand: IEI Technology Pages: 71
Ubiquiti ER-4 Quick Start Manuals preview
ER-4
Brand: Ubiquiti Pages: 22
Ublox NEO-D9S Quick Start Manual preview
NEO-D9S
Brand: Ublox Pages: 17
X-Micro WLAN 11g User Manual preview
WLAN 11g
Brand: X-Micro Pages: 74
Compaq StorageWorks AIT 35GB AutoLoader Overview And Installation preview
StorageWorks AIT 35GB AutoLoader
Brand: Compaq Pages: 4
Parker ACR1200 Hardware Manual preview
ACR1200
Brand: Parker Pages: 50
ICP DAS USA PDS-734D Quick Start Manual preview
PDS-734D
Brand: ICP DAS USA Pages: 8
Glacier G2080TiFE Installation Manual preview
G2080TiFE
Brand: Glacier Pages: 2
NETGEAR RP614 - Web Safe Router Installation Manual preview
RP614 - Web Safe Router
Brand: NETGEAR Pages: 16
Maipu SM3100-9TC-AC Install Manual preview
SM3100-9TC-AC
Brand: Maipu Pages: 26
Airlinkplus ASW224 User Manual preview
ASW224
Brand: Airlinkplus Pages: 20
Stahl HFisolator 9730/26-11 Operating Instructions preview
HFisolator 9730/26-11
Brand: Stahl Pages: 2
Behringer B-Control Fader BCF2000 Quick Start Manual preview
B-Control Fader BCF2000
Brand: Behringer Pages: 13
Smacq Technologies PCI-1232 User Manual preview
PCI-1232
Brand: Smacq Technologies Pages: 22
TRENDnet TW100-W2plus Specifications preview
TW100-W2plus
Brand: TRENDnet Pages: 2

Brands by name

Popular brands

Load more brands