Understanding Client Status
The Client List shows the status of each client in the network.
•
Green — Clients with currently active sessions.
•
Grey — Inactive. Inactive clients continue to be displayed as long as they were active within the
Duration selected.
•
Last 3 hours
•
Last 3 days
•
Last 14 days
Client data is removed from the system after 14 days of being inactive.
Related Links
Whitelisting and Blacklisting Clients
Clients on a black list are denied network access. Clients on a white list are granted network access. Use
these lists to create a subcategory of users that are set apart from the larger group by their access
privileges. The client MAC address is used to whitelist or blacklist the client.
Note
Configure one list that applies to all networks being broadcast by any AP managed by
ExtremeCloud Appliance or by an ExtremeCloud Appliance availability pair. From the Client
List, configure a black list or a white list, but not both. To filter specific users by MAC address,
configure Access Control rules.
To set up a list:
1 Go to
Clients
and click the
Blacklist
icon.
This displays the list
Mode
for your network and a list of MAC addresses.
2 Select
Whitelist
or
Blacklist
.
The Mode you select will apply to your entire network.
3 To add MAC addresses to the list, click
Add
and enter a MAC address for the client.
4 To delete a MAC address from the list, select the list and click
Delete
.
Related Links
on page 170
Client Actions
The following describes actions you can take on clients in the Clients list. From the Clients list, select one
or more clients and select one of the following actions from the
Actions
drop-down.
Monitor
ExtremeCloud Appliance User Guide for version 4.36.03
54
