Extreme Networks ExtremeAccess Series, Hardware Installation Manual

Page: 34 / 56

7 Final assembly should appear as follows:
Figure 16: Assembled MicroVSP in Two-Post Mount
The MicroVSP can now be installed in a standard 19" rack.
Installing Optional Components
After the switch is secured to the rack, install optional components.
VSP 7400 Series switches support the use of pluggable transceivers and cables in the SFP+, SFP28,
QSFP+, and QSFP28 formats.
For a list of the optical components supported with VSP 7400 Series switches, see the Extreme
Hardware/Software Compatibility and Recommendation Matrices .
Pluggable Transceiver Modules
Extreme Networks offers several optical transceiver modules for transmitting and receiving data over
optical fiber rather than through electrical wires. Install these modules using the instructions in
Extreme
Networks Pluggable Transceivers Installation Guide .
Optical Cables
Direct-attach copper and fiber cables provide connections between unpopulated SFP+, SFP28, QSFP+,
and QSFP28 ports.
To install optical cables, refer to the instructions in Extreme Networks Pluggable Transceivers Installation
Guide .
Installing Your Switch
ExtremeAccess Series: Hardware Installation Guide 34