•
Installing two ERS 3510GT or ERS 3510GT-PWR+ switches in an equipment rack
on page 28
Installing an ERS 3510GT or ERS 3510GT-PWR+ switch on a table or shelf
About this task
Install the switch models ERS 3510GT or ERS 3510GT-PWR+ on a flat surface such as a table or
shelf.
Before you begin
• Ensure the surface supports the combined weight of the switch and attached cables. Cable
weight varies for each installation.
• Allow at least 2 inches (5.1 cm) on each side of the switch for proper ventilation and at least 5
inches (12.7 cm) at the back of the switch for power cord clearance.
Procedure
1. Attach the rubber feet at the marked locations.
2. Set the switch on a table or shelf.
Switch installation
December 2017
Installing Ethernet Routing Switch 3500 Series
25