This icon indicates a general caution. Failure to comply with a caution notification can result in damage to equipment.
This icon indicates an electrical caution. Failure to comply with an electrical notification can result in serious injury or
death, and extensive damage to equipment.
The following table lists the safety precautions you should follow when installing your AP510C and AP510CX devices.
Extreme Networks devices must be installed by a professional installer who is certified to install these types of devices
and to ensure that they are properly grounded and meet applicable local and national electrical codes.
These devices are intended for indoor use only.
Do not install the device in an environment where the operating ambient temperature might exceed the recom-
mended ranges.
For products available in the USA/Canada market, for the 2.4 GHz band, only channels 1-11 can be operated. Selec-
tion of other channels is not possible.
Changes or modifications made to this device that are not expressly approved by the party responsible for com-
pliance could void the user's authority to operate the equipment.
Use only attachments and accessories specified by Extreme Networks.
These devices are not intended for use by persons (including children) with reduced physical, sensory, or mental cap-
abilities, or with lack of experience of knowledge unless they are given supervision or instruction concerning use of the
devices by a person who is responsible for their safety. Children should be supervised to ensure that they do not play
with the devices.
Electrostatic discharge (ESD) can damage equipment and impair electrical circuitry. ESD damage occurs when elec-
tronic components are improperly handled and can result in complete or intermittent failures. Be sure to follow ESD-pre-
vention procedures when handling electronic components and equipment.
During operation, the surfaces of the AP510C and AP510CX can become hot. Use caution when handling.
To meet US federal radiation exposure requirements, these devices should be installed at a minimum distance of 10"
(25.5 cm) from people or animals.
To meet EU radiation exposure requirements, these devices should be installed at a minimum distance of 8" (20 cm)
from people or animals.
To meet Canadian radiation exposure requirements, these devices should be installed at a minimum of 30 cm from
people or animals.
Install the AP
You can mount the AP510C and AP510CX on a flat surface or wall, or on the rails of a standard dropped ceiling grid. There is also an accessory
mounting bracket that allows you to install the device in Armstrong-style dropped ceilings (ordered separately).
The following sections describe how to install your AP510C and AP510CX devices and connect them to the network.
Shipping Carton Contents
The AP510C and AP510CX shipping carton contains the following items:
l
AP510C or AP510CX chassis
l
Mounting bracket
l
Read Me card
AP510C and AP510CX Hardware Guide
2
AP510C and AP510CX Hardware Guide
2
