Customer Service: [email protected] | www.extrememax.com
1
Screening Rake Assembly Instructions
3005.4095
3399ex0120
Includes:
(2) Arm Braces......................................A
(1) Handle..............................................B
(1) Rake Head........................................C
(2) 1/4”-20 x 5/8” Hex Bolts.................D
(1) 1/4”-20 x 1-1/2” Hex Bolt................E
(1) 1/4”-20 x 1-3/4” Hex Bolt................F
(4) 1/4” Lock Nuts.................................G
Assembly Instructions:
1. Place the slotted end of the handle onto the flat edge of the rake head, aligning the end handle hole with the center head
hole. Place 1/4”-20 x 1-1/2” hex bolt through the aligned holes. Do not tighten nut.
2. Attach the flat end of a brace piece to the rake head using one of the remaining holes and a 1/4”-20 x 5/8” hex bolt.
Curved edge of brace piece should be near the handle. Do not tighten nut. Repeat for second brace piece.
3. Attach the curved edges of the brace pieces next by aligning both brace holes with the handle hole. Place the 1/4”-20 x
1-3/4” hex bolt through the aligned hole.
4. Being careful not to over-tighten, snug each of the four nuts.
Product Satisfaction Guarantee
At Extreme Max, we pride ourselves on making quality products and wish to correct any mistakes on our end. If you are
not 100% satisfied with the product, for any reason, please reach out to us. We are here to help!
Warranty
This product is warranted for consumer use for 2 years after the date of retail purchase. Warranty includes parts only.
Warranty valid only in the USA.
This product is warranted to the original retail purchaser to be free from defects in material and workmanship, ordinary
wear and tear expected. This warranty shall not apply to any defects caused by: (I) overloading, (II) physical abuse
of goods or any acts of vandalism by any person, (III) improper installation or use contrary to the instructions, (IV)
commercial use. The sole remedy under this warranty is at the discretion of manufacturer: the replacement of the same
or similar product, or the refund of the original purchase price. Extreme Max™ is not responsible for any consequential
or incidental damages. Any and all freight charges to handle warranty claims are the responsibility of the consumer.
Extreme Max™ is not responsible for any labor charges that may be incurred.
For all inquries please send your name, mailing address, main contact phone number, original retail sales receipt,
summary of alleged defect and any applicable pictures to [email protected].
Warnings:
- Make sure all hardware is securely fastened before use.
- Do not throw the rake at people, animals or things.
- When you are not using the rake. Make sure the tines are facing downward to prevent serious harm or injury.
A
D
E
F
G
B
C
D
D
E
F
