background image

10

IMPORTANT INFORMATION

Your marquee is supplied with steel pins and tie-down 
ropes. These 

MUST

 all be used. For setup on hard surfaces 

such as pavement, weight plates, water weights or sandbags 

MUST

 be used for security. These are add-on accessories 

that can be purchased separately.

All roof tie-down straps 

MUST

 be attached and tensioned. 

These security methods will maximise safety. However, due 
to the unpredictable nature of weather, damage prevention 
is not guaranteed.

All canopies are considered temporary structures and 

MUST

 

be packed down and stowed away during adverse weather 
conditions such as heavy rain, strong winds or other storm 
events.

WARRANTY

Warranty covers manufacture’s defaults only. Warranty does 

NOT

 cover products or parts which have been altered or 

modified in any manner. This warranty does 

NOT 

apply to 

damage caused by wind, rain, storms or other forces of 
nature, nor does it cover accidental or deliberate damage 
of the product. Damage caused by these events may be 
covered under your home or business insurance policy.  This 
warranty does 

NOT

 apply if the setup of the product does 

not conform to product instructions. This express warranty is 
provided in lieu of all other warranties, explicit or implied. 

Extreme Marquees is 

NOT

 responsible for products 

damaged in transit.

If you are making a warranty claim for a manufacturer fault 
for reasons other than the above, please complete our 
Warranty Claim Form -

 

www.extrememarquees.co

.nz

/

resource-centre/ - and email it to the following address: 
[email protected]

.nz

Please complete the form and return it to us with photos to 
preview the manufacturer fault cited.

Alternatively, if seeking replacement parts outside of 
warranty please fill out the Replacement Parts form and 
return to us at: [email protected]

o.nz

. We will 

arrange a quotation and dispatch the required parts as soon 
as possible - www.extreme-marquees.co

.nz

/marqueespare-

parts/

MANUFACTURER’S WARRANTY

PRODUCT

WARRANTY

X5 True Blue Frame

    1 Years

X6 Velocity Frame

    3 Years

Classic Summit

    7 Years

X7 Tectonic Frame

    10 Years

Q8 Quasar Frame

    10 Years

Wave / Flare Banner Hardware

    1 Year

Cafe Umbrellas Frame

    3 Year

Star Shade Pole

    1 Year

Arch Tent Frame

    3 Years

EMX Inflatable Frame

    5 Years

Pavilion Frame

    5 Years

Pinnacle Frame

    10 Years

Crest Tent Frame

    10 Years

Table Covers

    1 Year

Pop Banner

    1 Year

Custom Banners / Fence Wraps

    1 Year

Roller Banner

    1 Year

FABRICS
Plain 500D PVC Coated Polyester

    1 Year

Printed 600D PU Coated Polyester

    1 Year

Printed UV Fabric Fade Resistant

    2 Years

Plain 580gsm PVC / Crest PVC

    5 Years

Printed 550gsm PVC

    2 Years

Clear PVC

    2 Years

Banner Fabric

    6 Months

Your product not listed? Contact us for warranty information.

PRODUCTION & DELIVERY 
TIME FRAMES

Extreme Marquee will endeavour to meet all customer due 
dates and deadlines. However, as there are many aspects 
out of our direct control such as third party freight providers, 
we can never guarantee an arrival date.  As such, Extreme 
Marquees does not accept liability for any missed due dates, 
nor do we accept any refund request based on this premise. 

Extreme Marquees has an outstanding reputation for 
meeting the tightest deadlines and our team will continue to 
strive for excellence in this regard. 

RETURNS POLICY

100% Satisfaction Guaranteed

As part of the Extreme Marquee experience, it is our 
commitment to provide superior products. If you are not 
completely satisfied with your Extreme Marquee purchase 
for any reason, we will do our best to rectify. You can return 
your product for a replacement or refund within thirty (30) 
days of your purchase. The product must be in new, unused 
condition. Extreme Marquees does

 NOT

 accept returns for 

any custom printed products unless the custom printed 
product has a fault under our manufacturers warranty. 

Extreme Marquees’ guarantee does not cover ordinary wear 
and tear or damage caused by improper use, or weather-
caused damage such as storms, rain or wind.

If you have received your Extreme Marquee purchase and it 
has a manufacturing defect in the materials or workmanship, 
please fill out our Warranty Claim Form - 
www.extrememarquees.co

.nz

/resource-centre/ - and email it 

to the following address: [email protected]

.nz

Additional products may be excluded from the returns 
policy. To find out more information on excluded items 
please contact Extreme Marquees.

Summary of Contents for X6 VELOCITY













Reviews: