2
Steel Pin
Width One
Foot Plate
MAPPING OUT FOOT PLATES
Please read instructions completely before setting up your Star Shade. Make sure you have all the components identified on the Parts List.
Recommended procedure below. For safety reasons it is recommended that four people are requiard for set-up and pack down.
1. Loop one end loop of the stringline through the foot
plate spike.
3. Using the stringline and the tape measure start mapping out the steel pins. Refer to table on page 1 for footing width (FW)
measurements for specific star shade size.
2. Push foot plate spike into the ground.
FW
FW
FW
FW
FW
FW
FW
