11
9. Locate the fuselage, 2-3mm socket head cap bolts and 2 washers. Secure
the landing gear to the fuselage by inserting a 3mm screw into a washer,
through the carbon fiber gear and into the pre-installed blind nut in the
fuselage. Make sure to use a drop of blue Loctite on each screw to prevent
them from backing out
.
10. Remove the covering over the right slot on the bottom of the elevator.
Scuff the portion of the control horn that will insert into the elevator with
sandpaper. You may also need to trim the corner of the baseplate to match the
elevator shape as shown. Slide the horn into the baseplate and secure the
control horn with medium CA
.
Summary of Contents for slick 580 exp
Page 1: ...1 SLICK 580 EXP 52 inch Electric ARF Copyright 2017 Extreme Flight ...
Page 10: ...10 ...
Page 16: ...16 ...