17. Secure the tiller using the provided screw, but do not over tighten as the
tiller should be able to move on the screw as the rudder is deflected
.
18. Place the tailwheel wire in the proper position, aligned with the rudder
and lock into place with the 2 set screws.
19. Use the hardware provided with the servos to install the rudder and
elevator servos in their respective location in the rear of the aircraft. From
the pilot's perspective the rudder servo mounts on the right side of the
fuselage and the elevator servo mounts on the left side. The elevator servo
should have the output shaft toward the rear of the aircraft while the rudder
servo output shaft should be toward the front of the aircraft
.
15
