52. Tear 4 short pieces of blue painters tape from a roll. Place each piece of tape on
the side of the fuselage so that each piece corresponds with one of the 4 cowl
mounting tabs. Use a fine tipped marker to mark the location of the pre-drilled
holes in the center of each mounting tab.
53. Roll the tape back and slide the cowl into position. Install the spinner onto the
motor shaft for reference and once satisfied with the cowl position roll the tape
back into place and secure the cowl. Use a 1/8" drill bit to drill a hole at the
location of the dot on each piece of tape.
36
